E-flite Blade mSR BNF Manual de instrucciones descargar pdf (Pagina 16)

30 31

Moving the aileron stick to the left will roll the helicopter to the left, allowing the

helicopter to be flown sideways towards the left when viewing the helicopter from

behind.

Mode 1

Mode 2

Helicopter Slides Left

Moving the aileron stick to the right will roll the helicopter to the right, allowing the

helicopter to be flown sideways towards the right when viewing the helicopter from

behind.

Note: This command does not cause the nose of the helicopter to turn! Rather,

it causes the helicopter to bank, and then slide left or right. Use of the

rudder stick (the left stick) is required to point the nose of the helicopter in

the desired direction.

Mode 1

Mode 2

Helicopter Slides Right

The aileron trim can be used to help keep the helicopter from drifting left or right

when in hover with no aileron stick input. For example, if the helicopter drifts to

the right when in hover, add left aileron trim until the helicopter hovers as level as

possible with no drifting to the right.

Once you’re familiar with the primary controls of the helicopter, you are almost ready

to fly.

Choosing a Flying Area

When you are ready for your first flight, you will want to select a relatively open

indoor area that is free of people and obstructions. And while it is possible for

experienced pilots to fly the Blade mSR in relatively small indoor areas with great

success due to its size and controllability, we strongly recommend an area with at

least 10-feet by 10-feet of floor space and no less than 8-foot ceilings when making

your first few flights.

Once you have properly trimmed your helicopter and become familiar with its

handling and capabilities, you will be able to fly in other smaller, less open areas.

Note: The Blade mSR is designed to be flown INDOORS and can be

successfully flown OUTDOORS by an EXPERIENCED PILOT with

CALM WIND CONDITIONS UP TO 5 MPH.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 25 26

Sin comentarios

E-flite Blade mSR BNF Manual de instrucciones Pagina 16